FREE DOMESTIC SHIPPING ON ORDERS OVER $199

NO TAX ON ORDERS FROM STATES OUTSIDE CALIFORNIA

THIS IS A POPULATED PCB AND PANEL SET - ALL SMD (SURFACE MOUNT) PARTS ARE ALREADY INSTALLED - YOU WILL NEED TO BUY OTHER ITEMS TO COMPLETE THE BUILD, LIKE POTS, JACKS AND KNOBS - REQUIRED ADDITIONAL ITEMS (CLICK HERE) - KNOBS ARE NOT ON THE BOMS - YOU WILL NEED TO SUPPLY THEM

Give II is a 12 HP Classic Analog VCO with additional Frequency Divider and Waveform mixing options.

The VCO provides five outputs, the last four of them can be mixed with an integrated mixer:

PULSE
SAW
TRIANGLE
3x PULSE SUB
NOISE

Patching a voltage/audio source into FM you can frequency modulate the oscillator. Incoming voltages can be attenuated with FM CV. In the middle of the module you will find the PWM potentiometer. Here you may change the pulse width of the pulse wave. The width may also be controlled via external voltage with the PWM jack and the PWM CV attenuator.

Just like all other classic analog VCOs GIVE II also tracks one volt per octave with the help of the 1V/OCT input jack. Each wave can also be hardsynced by an external wave patched to the SYNC jack.

In addition to the classic VCO functions GIVE II also provides an integrated frequency divider. The MIX output jack will not only supply the waveforms SAW, TRIANGLE and NOISE, but also provides up to 3 sub octaves derivated from the PULSE waveform. The volume of each suboctave may be adjusted with the potentiometer SUB 1-3. ORIG will adjust the volume of the original PULSE signal. Using the switch ORIG SQU you can flip the SQUARE waveform.

Details:

Classic Analog VCO
5 Outputs: SAW, TRI, SUB, NOISE, PULSE
1V/Octave tracking
Pulse Width Modulation with Attenunator
Frequency Modulation with Attenuator
Integrated Waveform Mixer
Skiff friendly design
Wrong Polarity Protection
3U Eurorack module, 12 HP wide
Power consumption: 31 mA at +12 V and 28mA at -12 V