CLIPPING CAT DIY - POPULATED PCB/PANEL SET
FREE DOMESTIC SHIPPING ON ORDERS OVER $199
NO TAX ON ORDERS FROM STATES OUTSIDE CALIFORNIA
CLIPPING CAT will make your sounds meow! It's a Vactrol-based distortion that will easily cram a lot of filth and grit into your tone. From sine waves to kick drums, this cat won't miss a scratching post! Based on the passive and very simple WORKMATE CLIPPING CAT, this souped-up 3U module now features three main controls. GAIN determines the amount of distortion applied to your signal. LEVEL decreases the signal level that is fed into the circuit and the CAT/NO CAT switch activates or deactivates the additional diode clipping function. You can choose whether you want hard (CAT) or soft clipping (NO CAT). Depending on the diodes you solder in, the clipping behaviour and sound will change drastically. CLIPPING CAT will only blink and meow if you set the switch to "CAT" and have set a good amount of gain.
The amount of gain can also be voltage controlled using the CV GAIN input socket. Each incoming CV signal can be attenuated with the corresponding potentiometer. The overall gain range can be adjusted using a trimmer on the back of the board.
This CV functionality also allows CLIPPING CAT to be used as a low-pass gate with the smooth vactrol-based behaviour we all love. Another trimmer allows the circuit to be optimized for LPG or distortion purposes.
On the Genuine Germanium version, to simplify the exchange of diodes for soft clipping mode, there is a "diode playground" on the back of the module where you can easily exchange through hole diodes. Different types of diodes will allow you to discover new and classic distortion sounds.
• Vactrol Distortion
• Diode Clipping
• Soft & Hard Clipping
• "Diode Playground“ version for Easy Replacement of Soft Clipping Diodes (Geranium version only)
• Vactrol LPG
• Skiff friendly
• Wrong polarity protection
• 3U Eurorack module, 4 HP wide
• Power consumption: 20mA on +12V, 20mA on -12V